Installing the Ingenico iSC 250 (CardConnect Only)  

Before you begin

  • This device requires that you have a Merchant Account with CardConnect.
  • Read our Meevo System Requirements and Supported Devices to ensure your computer and devices are compatible with Meevo.
  • Ingenico iSC 250 documentationcontains important information and details from the manufacturer that are not discussed in this topic. MSI recommends you read your device documentation before proceeding with the installation.

Installation steps at a glance

Step 1: Add Your Merchant Account in Meevo (separate topic)

Step 2: Hook up the credit card terminal (this topic)

Step 3: Activate or "pair" the credit card terminal with your Merchant Account in Meevo (separate topic)

Step 4: Assign a default Merchant Account and credit card terminal to a drawer in Meevo (separate topic)

Hook up the credit card terminal

  1. Before connecting the credit card terminal, make sure you've added your Merchant Account in Meevo.
  2. Use the image below and the iSC 250 device documentation to familiarize yourself with the components.

The components, from left to right, are:

  • Power adapter
  • Ingenico iSC 250
  • I/O communication cable for Ethernet connection
  1. Connect the I/O communication cable to the underside of the iSC 250.

  2. Connect the power adapter to the I/O communication cable.

  3. Plug the power adapter plug into a power outlet or surge protector. The device begins its boot process. After several minutes, the iSC 250 displays a BOLT screen and serial number. The device serial number appears across the top, and across the bottom of the screen you will see Unbolted. This means that the device is not receiving a network connection yet.
  4. To connect the device to the internet, plug the Ethernet cable end of the I/O communication cable into an Ethernet port that is connected to your network. The bottom of the screen now reads Bolted, indicating a successful connection to your network and the internet.

  5. Now that your device is hooked up, the next step is to activate or "pair" the credit card terminal with your Merchant Account in Meevo.